HLNODE

HLNODE is an analogue-addressable expansion fire detection panel featuring a modular architecture able to develop according to one’s needs. The HEKLA and HLNODE panels can operate both in stand-alone mode and in a network of many units. All of this in combination with the products of the new FYRA line, the EL.MO. line of analogue-addressable devices with on-board isolator.
HLNODE is compatible with two loop boards, HL2LOOP (supporting two operating modes: 1 x 250 devices in single-loop configuration or 2 x 125 devices in two-loop configuration) and HL4LOOP (supporting two operating modes: 2 x 250 devices in two-loop configuration or 4 x 125 devices in four-loop configuration). The strength of HEKLA and HLNODE is their capacity of expanding and propagating its technological force. It is possible to create a network of panels and expansion nodes (HEKLA and HLNODE respectively) and repeating keypads (HLREPEATER) using the RS422 serial line (through the HLNET optional module) as communication means.
HLNODE is certified CPR 305/2011 EN 54-2 and EN54-4.

Tags

  • Type

    Analogue-addressable expansion panel

    Address/loop management

    250 overall addresses on 1 or 2 loops (using HL2LOOP board) or 500 overall addresses on 2 or 4 loops (using HL4LOOP board)

    Maximum current on each single loop

    1 A

    Panel network

    All the devices can be managed from all the panels

    Multimaster panel network

    Yes (via RS422 serial line with HLNET optional board)

    Manageable zones

    384 available zones

    Manageable  I/O device groups

    512 available groups

    Manageable  alarm device groups

    512 available groups

    Signal propagation

    Propagation of all the events

    Maximum network expansion

    124 loops

    Protocol

    Management of FYRA loop devices

    Management of HLPOWER units on the loop

    Yes, using HLPL optional board

    Technological zone management

    Yes

    Delay mode 2 (according to italian M.D.)

    Yes

    System event log

    10.000 events

    Programming

    By propagation from other network devices (HEKLA and HLREPEATER)

    Batteries

    2 × 12 Ah / 12 Vdc batteries

    Dimensions

    W 340 x H 370 x D 145 mm

    Main board current draw when idle

    60 mA

    Power supply unit supplied current

    2.3 A @ 28.5 Vdc

    Power supply

    AC230V with internal power supply unit

    Regulations

    Certified CPR 305/2011 EN54-2 and EN 54-4

  • HEKLA

    1049.3 KB

    • HEKLA

      Brochure delle centrali antincendio HEKLA

    Download

    hekla

    760.14 KB

    • HEKLA

      HEKLA fire detection control unit brochure

    Download

  • Datasheet

    • Foglio tecnico
      Model
      15/07/2020
       
    • Datasheet
      Model
      22/07/2020
       

    Product Description

    • Descrizioni Capitolato
      Model
      15/07/2020
       
    • Product Description
      Model
      22/07/2020
       

    User Manual

    Quick Guide

    • Guida Rapida
      Model
      15/07/2020
       
    • Quick Guide
      Model
      31/07/2020
       
    • Quick Guide
      Model
      31/07/2020
       
    • Quick Guide
      Model
      31/07/2020
       
    • Quick Guide
      Model
      31/07/2020
       

    Technical Manual

    • Manuale Tecnico
      Model
      07/08/2020
       
    • Technical Manual
      Model
      18/09/2020
       

    Programming Manual

    • Manuali di Programmazione
      Model
      07/08/2020
       
    • Programming Manual
      Model
      15/10/2020
       

    Software

    • HLBROWSER
      Model
      10/05/2022
       

  • Programming Manual

    • Manuali di Programmazione
      Model
      30/09/2022
       
    • Programming Manual
      Model
      30/09/2022
       

    Software

    • HLBROWSER
      Model
      30/03/2021
       
    • CIHL00000200
      Centrale antincendio analogico indirizzata serie HEKLA senza display
    • CIHL00000201
      Analogue addressable fire detection control panel HEKLA series without display - EN version

Active Products