WME100

WME100 is a wireless expander module wich allows the connection to a conventional fire detection system up to 32 wireless devices in oder to send the alarms and/or failures to the control unit. The wireless system is possible also with analogue-addressable systems, thanks to the optional MCM-AS3B modules for AS loop or MCIEBOX for IE loop.

It’s compatible with TA1002 and TA1004 conventional control units, TA2000 conventional/analogue-addressable control unit and FX series analogue-addressable control units. The alarm and/or failure status is sent to the detection line such as a conventional detetctor by the proper relay.

It can be easily programmed by PC via RS232 through the “WirelexFire” supplied software. This software also allows to test the transmission quality. Certified CPR305/2011 (ex CPD 89/106/CEE certification) EN 54-25:2008 and EN 54-18:2005.

  • Module SGCWE100, wireless expander module
    Compatible lines
    • TA1002 and TA1004 conventional control units
    • TA2000 conventional/analogue-addressable control unit
    • FX series analogue-addressable control units
    Wireless communication Bidirectional
    Antenna Double orthogonal antenna that ensures the communication reliability
    Management Up to 32 wireless devices
    Wireless range 200m in open field
    Functions
    • Management up to 7 channels
    • Automatic control of wireless signal power
    • Automatic optimization of the frequency and communication level, automatic channel selection
    Frequency 868.15 MHz – 869.85 Mhz
    Modulation FSK
    Radiated power 5 dBm (3mW)
    Operating temperature -30°C  / +50°C
    Protection class IP51C
    Dimensions and weight W 120 x H 160 x D 50mm (without antennas), 330g
    Power consumption 60mA (alarm status)
    Power supply External (from the control unit or from a power supply)
    Standards Certified CPR305/2011 (ex CPD 89/106/CEE certification) EN 54- 25:2008 and EN 54-18:2005
  • Rivelazione incendio wireless

    741.31 KB

    • Incendio wireless

      Depliant dei dispositivi di rivelazione incendio wireless

    Wireless Fire Detection Line

    724.68 KB

    • Incendio wireless

      Wireless fire detection devices depliant

  • Step-by-step guide

    • Guida step-by-step
      Model
      13/11/2020
       
    • Step-by-step guide
      Model
      02/12/2020
       

    Datasheet

    • Foglio Tecnico
      Model
      21/01/2015
       
    • Data Sheet
      Model
      23/01/2015
       

    Product Description

    • Descrizione Capitolato
      Model
      21/01/2015
       
    • Product Description
      Model
      23/01/2015
       

    Technical Manual

    • Manuale Tecnico
      Model
      23/01/2015
       
    • Manuale Tecnico
      Model
      23/01/2015
       

    Other

    • Addendum - Programmazione via tastiera o software
      Model
      10/06/2019
       
    • Addendum
      Model
      05/08/2016
       
    • WFCON0000100
      SGCWE100 Modulo di espansione wireless

Active Products