Analogic interface modules

MD1P is a module for FYRA loops designed for the simple control of 1 door. It is equipped with 1 balanced input and 1 output associated between them to receive signals from devices or detectors to control 1 door or 1 fire door and to activate their closure with its output relay. The module also features 1 independent balanced / non-balanced input for alarm and fault (open line and line short circuit) used to connect on the loop 1 detector or other conventional device equipped with N.O. relay contacts.

MD2P is a module for the complete control of 2 doors for FYRA loops. It is equipped with 4 balanced inputs and 2 outputs associated between them to receive signals from devices or detectors to control 2 doors or 2 fire doors and to activate their closure with its output relay. Each output relay manages 2 inputs that control door status: one input controls door open state, the other input controls door closed status.

ISOBASE is an isolator module for AS and Evolution loop which allows to exclude a portion of the loop in the event of a short circuit. In this way the part of the loop not involved by the short circuit maintains the normal operation.

ISOBOX is an isolator module for AS and Evolution loop which allows to exclude a portion of the loop in the event of a short circuit. In this way the part of the loop not involved by the short circuit maintains the normal operation.

Addressable acoustic repeater for AS loop

Analogue fire detection module for AS-ABS ed EV-ABS

ISOSPLITAS is a module for TA2000 control units (with TAEXP20 optional module) and FX series (with FX/EXP01 optional module) and compatibles which allows to connect two separated loop branches to the same loop expansion module.

Sounder for AS series analogue loop

1I1OASBOX is a module that can be used in sophisticated fire detection systems managed by TA2000 conventional/analogue addressable and by FX/50, FX/20, FX/10 analogue addressable and other compatible control units equipped with analogue addressable loop with AS protocol; it is equipped with 1 programmable balanced/unbalanced input and 1 relay output.

AS analogue fire detection module for door control 2 inputs/1 output + 1 additional input

4 analogue address.input and 4 output module

AS analogue fire detection module for 2 doors control 4 inputs/2 outputs

AS analogue fire detection module for 4 doors control 4 inputs/4 outputs

Supervision and control module