Analogue addressable

Indoor and outdoor conventional manual call points for the immediate activation of the alarm status.

EVMCPV10

10x glasses for EVMCP analogue addressable call point

STNCPIP2

STNCPIP2

The STNCPIP2 is an outdoor/indoor analogue-addressable fire detection call point for TA2000, FX series and compatible control units equipped with analogue-addressable loop with AS protocol. The alarm is generated by pressing the centre of the front glass.


EV-MCP RESET

EV-MCP RESET

EV-MCP RESET is an analogue-addressable fire detection call point for FX series or  compatible control units that use the EVOLUTION protocol. The alarm is generated by pressing the centre of the front glass.

PAR

PAR

PAR call point is used with analogue-addressable control panels TA2000, TA4000 and HEKLA series equipped with FYRA loop boards. Alarm signals are generated by pressing the centre of the front glass. PAR is equipped with a isolator circuit that can be disabled via jumper and on the front panel it features two yellow LEDs for loop sections short circuits, one green LED for control panel polling mode.

ST-NCP-EN2

ST-NCP-EN2

The ST-NCP-EN2 is an analogue-addressable fire detection call point for TA2000, FX series and compatible control units equipped with analogue-addressable loop with AS protocol. The alarm is generated by pressing the center of the front glass.


STNCPIP

STNCPIP

Outdoor analogue addressable glassbreak fire alarm call point

Active Products