Items tagged with FYRA

HL2LOOP

HL2LOOP

2-loop FYRA expansion board for HEKLA panels.
HL4LOOP

HL4LOOP

4-loop FYRA expansion board for HEKLA panels

HLNET

HLNET

Module for connection of one single HEKLA panel to a panel network.

HLREPEATER

HLREPEATER

HLREPEATER is a repeating keypad for systems based on HEKLA and HLNODE panels. The strength of the HEKLA system is its capacity of expanding and propagating its technological force. It is possible to create a network of panels and expansion nodes (HEKLA and HLNODE respectively) and repeating keypads (HLREPEATER) using the RS422 serial line (through the HLNET optional module) as communication means.

LSOUND

LSOUND

LSOUND is an indoor red alarm sounder with 32-tone deep base. It is directly connected to an FYRA analogue-addressable loop with no need to install an output module. LSOUND is equipped with a line isolator and an on-board dipswitch for volume adjustment (high/medium/low) and tones selection.
LSOUND65

LSOUND65

LSOUND65 is an indoor red alarm sounder with flasher. It is directly connected to an FYRA analogue-addressable loop with no need to install an output module. LSOUND65 is equipped with a line isolator and an on-board dipswitch for address and tones selection. LSOUND65 certifications: CPR 305/2011 EN54-3.

MDCONV

MDCONV

[NB763-I] MDCONV is a module for FYRA loops that allows to integrate conventional detectors and alarm call points for the manual triggering of fire alarms on analogue-addressable loops. The module is equipped with an integrated isolator protecting the line in case of short circuits,
MDSPLIT

MDSPLIT

MDSPLIT is a split module for TA2000 and TA4000 control panels (with FYRA loop modules) that allows to connect the two branches of an FYRA loop to the same control panel board.

PAR

PAR

PAR call point is used with analogue-addressable control panels TA2000, TA4000 and HEKLA series equipped with FYRA loop boards. Alarm signals are generated by pressing the centre of the front glass. PAR is equipped with a isolator circuit that can be disabled via jumper and on the front panel it features two yellow LEDs for loop sections short circuits, one green LED for control panel polling mode.
TALOOP

TALOOP

TALOOP is a FYRA loop expansion board that can be installed onto TA2000 and TA4000 fire detection panels and allows to connect up to 254 analogue-addressable devices per loop. In such a configuration, TA2000 and TA4000 panels become advanced analogue-addressable/conventional hybrid fire detection panels.

Active Products