Inserters

Key points to do the connection, disconnection and partialization operations of the control unit directly from the entry gates.
I9

I9

I9 is a proximity key reader. The reader features four LEDs for control unit or system state visualisation and two LEDs to indicate proximity key approach. It is equipped with an input, an open-collector output and a dip-switch for addressing. It can be directly wired to the serial line of control units equipped with RS-485 ULTRABUS interface (among them, ETR512, ETR256, ETR128 require firmware version 2.0 or higher; ETR100 1.0 or higher). I9 is compatible with Keystone adapters. It is certified IMQ-Allarme EN50131-3 grade 2-3 depending on the system it is installed in, environmental class II
I8

I8

I8 is a dark grey colour addressable proximity reader wich allows to arm and disarm the control unit just approaching a M4 or M4LED proximity key on it. It’s compatible with ETR, ET4, NET, VIDOMO and TITANIA intrusion detection control units. It can be connected directly to the control units’ serial BUS via RS485.

I8B

I8B

I8B is a white colour addressable proximity reader wich allows to arm and disarm the control unit just approaching a M4 or M4LED proximity key on it. It’s compatible with ETR, ET4, NET, VIDOMO and TITANIA intrusion detection control units. It can be connected directly to the control units’ serial BUS via RS485.

I8G

I8G

I8G is a grey/silver no metallic addressable proximity reader wich allows to arm and disarm the control unit just approaching a M4 or M4LED proximity key on it. It’s compatible with ETR, ET4, NET, VIDOMO and TITANIA intrusion detection control units. It can be connected directly to the control units’ serial BUS via RS485.

I8S

I8S

I8S is a dark grey colour addressable proximity reader wich allows to arm and disarm the control unit just approaching a M4 or M4LED proximity key on it. It is suitable for outdoor installation and it’s compatible with ETR, ET4, NET, VIDOMO and TITANIA intrusion detection control units. It can be connected directly to the control units’ serial BUS via RS485.
I66

I66

I66 is a dark grey colour proximity key reader which allows to arm and disarm the control unit just approaching a M4 or M4LED proximity key on it. It’s compatible with NIRVA or ANIMA series keypads, with ETRZENITH series key points or HERCOLA, VILLEGGIO and VILLEGGIO NG-TRX control units.
I66B

I66B

I66B is a white colour proximity key reader which allows to arm and disarm the control unit just approaching a M4 or M4LED proximity key on it. It’s compatible with NIRVA or ANIMA series keypads, with ETRZENITH series key points or HERCOLA, VILLEGGIO and VILLEGGIO NG-TRX control units.
I66G

I66G

I66G is a no metallic grey/silver colour proximity key reader which allows to arm and disarm the control unit just approaching a M4 or M4LED proximity key on it. It’s compatible with NIRVA or ANIMA series keypads, with ETRZENITH series key points or HERCOLA, VILLEGGIO and VILLEGGIO NG-TRX control units.
I66S

I66S

I66S is a dark grey colour proximity key reader which allows to arm and disarm the control unit just approaching a M4 or M4LED proximity key on it. It is suitable for outdoor installation and it’s compatible with NIRVA or ANIMA series keypads, with ETRZENITH series key points or HERCOLA, VILLEGGIO and VILLEGGIO NG-TRX control units.

IZENITH

IZENITH

IZENITH is a sectorizable proximity reader with 4 system partition wich is able to arm, disarm and control the intrusion detection system. It’s compatible with ETR, NET, VILLEGGIO and  TITANIA control units.

IZENITHB

IZENITHB

IZENITHB is a sectorizable proximity reader with 4 system partition wich is able to arm, disarm and control the intrusion detection system. It’s compatible with ETR, NET, VILLEGGIO and  TITANIA control units.

ETRZENITH

ETRZENITH

Flush-mount key point

ETRZENITHB

ETRZENITHB

Flush-mount key point white colour

MDARM

MDARM

RS-485 addressable arming module to be used with an external reader

Active Products